Sparkfun Products

DESCRIPTION The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface that means with just two wires, your microcontroller can inter...

DESCRIPTION Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-texti...

DESCRIPTION 6-pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Volta...

DESCRIPTION This is a 12-step rotary encoder with a nice 'clicking' feel. It's breadboard friendly and has a pretty handy select switch (by pushing...

DESCRIPTION Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmwa...

DESCRIPTION This is the XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle, you can plug the unit directly into...

DESCRIPTION The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potentially haz...

DESCRIPTION Sometimes you just need an MP3 to play. Whether it’s a theme song as you enter the room or a power song when you are working out. The S...

DESCRIPTION The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/...

DESCRIPTION The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the h...

DESCRIPTION The Pro Micro 3.3V/8MHz is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to...

DESCRIPTION This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and the board includes 4 mounting holes in the ...

DESCRIPTION This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, centre positive. This cable allows the user to use ...

DESCRIPTION This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functio...

DESCRIPTION Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same...

DESCRIPTION The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analogue converter (DAC), which converts I2S (not to be confused wi...

DESCRIPTION This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger p...

DESCRIPTION This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisu...

DESCRIPTION This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole ...

DESCRIPTION The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-chann...

DESCRIPTION This is a simple pack of five Red LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure...

DESCRIPTION The SparkFun OpenPIR is a highly customisable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. Passive infrared...

DESCRIPTION With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to break...

DESCRIPTION Once you've hacked everything, why not go out into the garage and hack your car? This cable allows you to access the pins on your car'...

DESCRIPTION The SparkFun Qwiic OpenLog is the smarter and better looking cousin to the extremely popular OpenLog but now SparkFun has ported the or...

DESCRIPTION This is a breakout board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different ...

DESCRIPTION Looking for an option to sense ambient light? The VEML6030 Qwiic board is a great starter option. The VEML6030 is a high accuracy ambie...

DESCRIPTION The Qwiic Micro OLED Breakout is a Qwiic-enabled version of the popular Micro OLED display! The small monochrome, blue-on-black OLED sc...

DESCRIPTION This is a simple pack of five Pink LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure...

DESCRIPTION This is the Wheel Encoder Kit from DAGU, a simple add-on to any wheeled robot that can help measure the speed or distance the chassis ...

DESCRIPTION The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with GNSS boards equipped with a U.FL at a fra...

DESCRIPTION This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leis...

DESCRIPTION This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pres...