Sparkfun Products

DESCRIPTION Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-texti...

DESCRIPTION 6-pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Volta...

DESCRIPTION Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmwa...

DESCRIPTION This is a 12-step rotary encoder with a nice 'clicking' feel. It's breadboard friendly and has a pretty handy select switch (by pushing...

DESCRIPTION This is the XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle, you can plug the unit directly into...

DESCRIPTION The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potentially haz...

DESCRIPTION Sometimes you just need an MP3 to play. Whether it’s a theme song as you enter the room or a power song when you are working out. The S...

DESCRIPTION The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/...

DESCRIPTION The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the h...

DESCRIPTION The Pro Micro 3.3V/8MHz is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to...

DESCRIPTION This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and the board includes 4 mounting holes in the ...

DESCRIPTION This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, centre positive. This cable allows the user to use ...

DESCRIPTION The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analogue converter (DAC), which converts I2S (not to be confused wi...

DESCRIPTION This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functio...

DESCRIPTION Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same...

DESCRIPTION This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger p...

DESCRIPTION This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisu...

DESCRIPTION This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole ...

DESCRIPTION The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-chann...