Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 0.5mm

Adafruit  |  SKU: 4355
£5.99
Tax included, shipping and discounts calculated at checkout.

Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 0.5mm is backordered and will ship as soon as it is back in stock.


DESCRIPTION

This rubber sheet is made of the same carbon-black impregnated rubber material that the conductive rubber cord uses. Traditionally it would be used for EMF shielding or conductive gaskets - but it's very fun to play with and we think it makes for an interesting stretch sensor or maybe a conductive material that is soft and conforming.

In a 'relaxed' state, the bulk sheet resistivity is about 50 ohm*mm. As you pull on it, the resistance increases (the particles get further apart). You can stretch the rubber about 50-70% longer than the resting length, so a 6" piece shouldn't be stretched more than 10". Once the force is released, the rubber will shrink back, although it's not very 'fast' and it takes a minute or two to revert to its original length. It's not a true linear sensor, and the resistance may vary from batch to batch, so we consider it a way to measure stretching motion but isn't really precise.

This stuff is fun and comes as a 200mm by 200mm square with 0.5mm thickness. You can easily cut this material with scissors or a die. You can use it as a conductor or add a 100-ohm resistor as a divider, then use our handy Thermistor tutorial to measure the analogue voltage and convert that back to resistance.

FEATURES
  • Product Dimensions: 200.0mm x 200.0mm x 0.5mm / 7.9" x 7.9" x 0.0"
  • Product Weight: 22.6g / 0.8oz
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 0.5mm - Component
Adafruit

Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 0.5mm

£5.99
DESCRIPTION

This rubber sheet is made of the same carbon-black impregnated rubber material that the conductive rubber cord uses. Traditionally it would be used for EMF shielding or conductive gaskets - but it's very fun to play with and we think it makes for an interesting stretch sensor or maybe a conductive material that is soft and conforming.

In a 'relaxed' state, the bulk sheet resistivity is about 50 ohm*mm. As you pull on it, the resistance increases (the particles get further apart). You can stretch the rubber about 50-70% longer than the resting length, so a 6" piece shouldn't be stretched more than 10". Once the force is released, the rubber will shrink back, although it's not very 'fast' and it takes a minute or two to revert to its original length. It's not a true linear sensor, and the resistance may vary from batch to batch, so we consider it a way to measure stretching motion but isn't really precise.

This stuff is fun and comes as a 200mm by 200mm square with 0.5mm thickness. You can easily cut this material with scissors or a die. You can use it as a conductor or add a 100-ohm resistor as a divider, then use our handy Thermistor tutorial to measure the analogue voltage and convert that back to resistance.

FEATURES
View product