DVI Breakout Board - For HDMI Source Devices

Adafruit  |  SKU: 4038
£2.99
Tax included, shipping and discounts calculated at checkout.

DVI Breakout Board - For HDMI Source Devices is backordered and will ship as soon as it is back in stock.


DESCRIPTION

This breakout board has no active components on it. It's just a connector you can plug an HDMI/DVI cable into, and 220-ohm series resistors. There's a spot for an I2C EEPROM and some resistors, but those are for advanced folks who may want to create a 'sink' device with an EDID.

FEATURES
  • Product Dimensions: 30.4mm x 21.6mm x 8.5mm / 1.2" x 0.9" x 0.3"
  • Product Weight: 3.9g / 0.1oz
RESOURCES

Wire up the bottom pins from your Pico board with the following

  • GP12 to D0+
  • GP13 to D0-
  • GP14 to CK+
  • GP15 to CK-
  • GP16 to D2+
  • GP17 to D2-
  • GP18 to D1+
  • GP19 to D1-
Tutorial
DVI Breakout Board - For HDMI Source Devices - Component
Adafruit

DVI Breakout Board - For HDMI Source Devices

£2.99
DESCRIPTION

This breakout board has no active components on it. It's just a connector you can plug an HDMI/DVI cable into, and 220-ohm series resistors. There's a spot for an I2C EEPROM and some resistors, but those are for advanced folks who may want to create a 'sink' device with an EDID.

FEATURES
RESOURCES

Wire up the bottom pins from your Pico board with the following

Tutorial
View product