Grove - ADC for Load Cell (HX711)

Seeed Studio  |  SKU: 3489
£3.08 £4.62
Tax included, shipping and discounts calculated at checkout.


DESCRIPTION

The Grove - ADC for Load Cell is designed to save you time and effort by making it easy to use load cells. 

The Grove - ADC for Load Cell (HX711) is a 24-bit A/D converter designed specifically for the load cell. It contains an on-chip low noise programmable amplifier with an optional gain of 32, 64 and 128. The HX711 chip integrates a regulated power supply, an on-chip clock oscillator, and other peripheral circuits, which have the advantages of high integration, fast response, and strong anti-interference.

With the Grove connector and 4-pin screw terminal, it becomes quite easy to connect the load cell and microcontroller, with no soldering required. You can build your own Arduino weight sensor system in just a few simple steps. 

Please Note:

  • Channel A is for weight measurement, it has a programmable gain of 128 or 64. Channel B is used for system parameter detection, it has a fixed 32 gain
FEATURES
  • Working voltage: 2.6V--5.5V (Note: The module measurement accuracy is related to the supply voltage. The higher the voltage, the higher the accuracy.)
  • Working current: <1.5mA
  • Detection accuracy: 24 bits
  • Optional 10SPS or 80SPS output data rate
  • Optional gain: 32 for Channel B / 64 and 128 for Channel A
RESOURCES
Grove - ADC for Load Cell (HX711) - Grove
Seeed Studio

Grove - ADC for Load Cell (HX711)

£3.08 £4.62
DESCRIPTION

The Grove - ADC for Load Cell is designed to save you time and effort by making it easy to use load cells. 

The Grove - ADC for Load Cell (HX711) is a 24-bit A/D converter designed specifically for the load cell. It contains an on-chip low noise programmable amplifier with an optional gain of 32, 64 and 128. The HX711 chip integrates a regulated power supply, an on-chip clock oscillator, and other peripheral circuits, which have the advantages of high integration, fast response, and strong anti-interference.

With the Grove connector and 4-pin screw terminal, it becomes quite easy to connect the load cell and microcontroller, with no soldering required. You can build your own Arduino weight sensor system in just a few simple steps. 

Please Note:

FEATURES
RESOURCES
View product