Translation missing: en.general.accessibility.skip_to_content

ItsyBitsy M4 Express featuring ATSAMD51 (ID:3800)

SKU 2763
£16.99 inc VAT
£14.16 ex VAT
Out of Stock

More available in 5-7 days.
Available for backorder (more info)

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy M4 Express featuring the Microchip ATSAMD51! Small, powerful, with an ultra-fast ATSAMD51 Cortex M4 processor running at 120 MHz - this microcontroller board is perfect when you want something very compact, with a ton of horsepower, and a bunch of pins. This Itsy is like a bullet train, with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favourite new chipset.

ItsyBitsy M4 Express is only 1.4" long by 0.7" wide but has 6 power pins, 23 digital GPIO pins (7 of which can be analogue in, 2 x 1 MSPS analogue out DACs, and 18 x PWM out). It's the same chip as the Adafruit Metro M4 but really really small. So it's great once you've finished up a prototype on a Metro M4 or (the upcoming) Feather M4, and want to make the project much smaller. It even comes with 2MB of SPI Flash built in, for data logging, file storage, or CircuitPython code.

The most exciting part of the ItsyBitsy M4 is that while you can use it with the Arduino IDE, it ships it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with on it. Edit with your favourite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler is needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Itsy' and your code will go with you.

  • Same size, form-factor as the ItsyBitsy 32u4 and ItsyBitsy M0, and nearly-identical pinout as both
  • ATSAMD51 32-bit Cortex M4 core running at 120 MHz
  • Hardware DSP and floating point support
  • 512 KB flash, 192 KB RAM
  • 2 MB SPI FLASH chip for storing files and CircuitPython code storage.
  • 32-bit, 3.3V logic, and power
  • Tons of GPIO! 23 x GPIO pins with the following capabilities:
    • Dual 1 MSPS 12-bit true analogue DAC (A0 and A1) - can be used to play 12-bit stereo audio clips
    • Dual 1 MSPS 12-bit ADC (7 analogue pins some on ADC1 and some on ADC2)
    • 6 x hardware SERCOM - Native hardware SPI, I2C and Serial are all available
    • 18 x PWM outputs - for servos, LEDs, etc
    • No I2S. We have no idea why but I2S is only supported on the 64-pin version of this chip and we could only fit the 48-pin version. But there's a stereo DAC you could use?
    • 8-bit Parallel capture controller (for camera/video in)
    • 1 x Special Vhigh output pin gives you the higher voltage from VBAT or VUSB, for driving NeoPixels, servos, and other 5V-logic devices. Digital 5 level-shifted output for high-voltage logic level output.
    • Can drive NeoPixels or DotStars on any pins, with enough memory to drive 60,000+ pixels. DMA-NeoPixel supports the VHigh pin so you can drive pixels without having to spend any processor time on it.
  • Built-in crypto engines with AES (256 bit), true RNG, Pubkey controller
  • Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, Keyboard/Mouse HID, or even a little disk drive for storing Python scripts.
  • Can be used with Arduino IDE or CircuitPython
  • Built-in red pin #13 LED
  • Built-in RGB DotStar LED
  • Reset the button and pin
  • Power with either USB or external output (such as a battery) - it'll automatically switch over
  • Comes pre-loaded with the UF2 bootloader, which looks like a USB storage key. Simply drag firmware onto the program, no special tools or drivers are needed! It can be used to load up CircuitPython or Arduino IDE (it is bossa v1.8 compatible)