Translation missing: en.general.accessibility.skip_to_content

PyGo1 - Tracking and Communication Device

by Pycom
SKU 4387
Save 11%
Original Price £59.99 inc VAT
Current Price £53.34 inc VAT
£44.45 ex VAT
30 in stock.

Meet the PyGo1 which is in essence a LoPy4 module on steroids! They packed the LoPy4 in an IP6X case and gave it an OLED, a GPS, an accelerometer, some state-of-the-art antennas, and a LiPo battery. The PyGo1 features six exposed pins: 2 for power and 4 universal inputs/outputs with digital/analogue capabilities so that you can connect different types of sensors and actuators. Developers can physically connect Things and sensors to a PyGo!

Best of all, the PyGo are usable with the Pylife Mobile App for Android and iOS and can link up with other Pycom modules. Pycom launched the PyGo modules with the ability to mesh together at distances of up to 12 km. PyGo1 includes WiFi, Bluetooth, and LoRa.

PyGo1 Features

  • Powerful CPU
  • Five networks: WiFi, BLE, LoRa, and LoRa (MESH)
  • Up to 1KM WiFi range
  • Electrical circuit protection
  • Ultra-low power usage: a fraction compared to other connected microcontrollers
  • Pymakr IDE supported
  • Pylife Application with IFTTT style environment for light programming
  • OLED
  • IP6X rated


  • Espressif ESP32 SoC
  • Dual processor and WiFi radio system on chip
  • Networking processor handles the WiFi connectivity and the IPv6 stack
  • Main processor is entirely free to run the user application
  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA


  • Analog channels: 8_12 bit ADCs, 2_8 bit DAC
  • Timers: 2_64 bit with PWM with up to 16 channels
  • DMA on all peripherals
  • 2 Pins (Power)
  • GPIO: 4 analog input (0-3.3V 12bit SAR ADC) and digital (3.3V logic) input/output pins.

Hash / Encryption

  • SHA, MD5, DES, AES

WiFi Networking

  • 802.11b/b/n 16mbps


  • Low energy and classic


  • Running at 32KHz


  • Node range: Up to 50km

Security & Certifications

  • SSL/TLS support up to 1.2
  • WPA Enterprise security
  • AES encryption engine


  • RAM: 64Mbit
  • Flash Memory: 8MB
  • Hardware floating point acceleration
  • Python multi-threading


  • LiPo battery: 420mAh LiPo 4.2V


  • Connect upto 200 devices in a mesh using our LoRamesh technology

Sigfox Operating Frequencies

  • RCZ1 – 868MHz(Eu)
  • RCZ2 – 902MHz (US, Can and Mex)
  • RCZ3 – (Jap and Kor)
  • RCZ4 – 920-922MHz (ANZ, Latin America and S-E Asia)

Bluetooth Networking

  • Low energy and classic
  • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
  • Class-1, Class-2 and Class-3 transmitter without external power amplifer
  • Enhanced power control
  • 10dBm transmitting power
  • NZIF receiver with -98 dBm sensitivity
  • Adaptive Frequency Hopping (AFH)
  • Standard HCI based on SDIO/SPI/UART
  • High speed UART HCI, up to 4 Mbps
  • BT 4.2 controller and host stack
  • Service Discover Protocol (SDP)
  • General Access Profile (GAP)
  • Security Manage Protocol (SMP)
  • Bluetooth Low Energy (BLE)
  • HID
  • All GATT-based profile supported
  • SPP-Like GATT-based profile
  • BLE Beacon
  • CVSD and SBC for audio codec
  • Bluetooth Piconet and Scatternet

LoRa Operating Frequencies

  • 868MHz(Europe) at 14dBm maximum
  • 915MHz (North and South America, Australia and New Zealand) at 20dBm maximum

LoRa Specification

  • Power consumption: 10mA Rx, 28mA Tx
  • LoRaWAN stack – Class A and C devices
  • Node range: Up to 40km
  • Nano-gateway: Up to 12km (Capacity up to 200 nodes)
  • Auto-connect to the ThingsNetwork

WiFi Networking

  • Up to 1km range
  • 802.11b/g/n 16mbps
  • Power: 12mA in active mode, 5uA in standby


  • 41 x 20 x 22.5 (mm)


  • 24g
  • 54g (Packaged)