PyGo2 - Tracking and Communication Device

Pycom  |  SKU: 4388
(1)
£66.67 £79.98
Tax included, shipping and discounts calculated at checkout.


DESCRIPTION

Meet the PyGo2 which is in essence a FiPy module on steroids! Pycom packed the FiPy in an IP6X case and gave it an OLED, a GPS, an accelerometer, some state-of-the-art antennas, and a LiPo battery. The PyGo2 features six exposed pins: 2 for power and 4 universal inputs/outputs with digital/analogue capabilities so that you can connect different types of sensors and actuators. Developers can physically connect Things and sensors to a PyGo!

Best of all, the PyGo modules are used with the Pylife Mobile App for Android and iOS and can link up with other Pycom modules. They launched the PyGo modules with the ability to mesh together at distances of up to 12 km. PyGo2 includes WiFi, Bluetooth, LoRa and dual LTE-M (embedded SIM for CAT M1 and NB-IoT from 1NCE) the PyGo2 gives access to all the world’s LPWAN networks on one tiny board.

FEATURES

PyGo2 Features

  • Powerful CPU
  • Pylife Mobile App for Android and iOS
  • Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1 (embedded SIM chip), LoRa and LoRa MESH
  • Up to 1KM WiFi range
  • Ultra-low power usage
  • Pymakr IDE supported
  • OLED
  • IP6X rated

Processing

  • Espressif ESP32 SoC
  • Dual processor and WiFi radio system on chip
  • Networking processor handles the WiFi connectivity and the IPv6 stack
  • Main processor is entirely free to run the user application
  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Interfaces

  • Analog channels: 8_12 bit ADCs, 2_8 bit DAC
  • Timers: 2_64 bit with PWM with up to 16 channels
  • DMA on all peripherals
  • 2 Pins (Power)
  • GPIO: 4 analog input (0-3.3V 12bit SAR ADC) and digital (3.3V logic) input/output pins.

Encryption

  • SHA, MD5, DES, AES

Networking

  • 802.11b/b/n 16mbps
  • Low energy and classic
  • Running at 32KHz
  • Node range: Up to 50km

Security & Certifications

  • SSL/TLS support up to 1.2
  • WPA Enterprise security
  • AES encryption engine

Memory

  • RAM: 4MB
  • Flash: 8MB
  • Hardware floating point acceleration
  • Python multi-threading

Sigfox Operating Frequencies

  • RCZ1 – 868MHz(Eu)
  • RCZ2 – 902MHz (US, Can and Mex)
  • RCZ3 – (Jap and Kor)
  • RCZ4 – 920-922MHz (ANZ, Latin America and SE Asia)

Bluetooth Networking

  • Low energy and classic
  • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
  • Class-1, Class-2 and Class-3 transmitter without external power amplifier
  • Enhanced power control
  • 10dBm transmitting power
  • NZIF receiver with -98 dBm sensitivity
  • Adaptive Frequency Hopping (AFH)
  • Standard HCI based on SDIO/SPI/UART
  • High speed UART HCI, up to 4 Mbps
  • BT 4.2 controller and host stack
  • Service Discover Protocol (SDP)
  • General Access Profile (GAP)
  • Security Manage Protocol (SMP)
  • Bluetooth Low Energy (BLE)
  • ATT/GATT
  • HID
  • All GATT-based profile supported
  • SPP-Like GATT-based profile
  • BLE Beacon
  • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
  • CVSD and SBC for audio codec

LoRa Specification

  • 868MHz(Eu) at 14dBm maximum
  • 915MHz (America, Australia and New Zealand) at 20dBm maximum
  • Power consumption: 10mA Rx, 28mA Tx
  • LoRaWAN stack – Class A and C devices
  • Node range: Up to 20km
  • Nano-gateway: Up to 12km (Capacity up to 200 nodes)

LTE-M Spec

  • 34 bands supports from 699Mhz to 2170Mhz (Total worldwide support)
  • One single chip for both CAT-M1 and -NB1 (yes, only one chip)
  • 3GPP release 13 LTE Advanced Pro
  • Supports narrowband LTE UE categories M1/NB1
  • Integrated baseband, RF, RAM memory and power management
  • Reduced Tx power class option
  • Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
  • Data rates:
    • 300 kbps DL
    • 375 kbps UL (LTE Cat M1 in 1.4 Mhz, HD-FDD)
    • 40 kbps DL
    • 55 kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)

Frequencies

Ports for LTE Bands Tx Rx
Low bands 5, 8, 12, 13, 18, 19, 20, 28 699 to 915 MHz 729 to 960 MHz
Mid bands 1, 2, 3, 4 1710 to 1980MHz 1805 to 2170 MHz

Dimensions

  • 41 x 20 x 22.5 (mm)
  • 26g
PyGo2 - Tracking and Communication Device - Component
Pycom

PyGo2 - Tracking and Communication Device

£66.67 £79.98
DESCRIPTION

Meet the PyGo2 which is in essence a FiPy module on steroids! Pycom packed the FiPy in an IP6X case and gave it an OLED, a GPS, an accelerometer, some state-of-the-art antennas, and a LiPo battery. The PyGo2 features six exposed pins: 2 for power and 4 universal inputs/outputs with digital/analogue capabilities so that you can connect different types of sensors and actuators. Developers can physically connect Things and sensors to a PyGo!

Best of all, the PyGo modules are used with the Pylife Mobile App for Android and iOS and can link up with other Pycom modules. They launched the PyGo modules with the ability to mesh together at distances of up to 12 km. PyGo2 includes WiFi, Bluetooth, LoRa and dual LTE-M (embedded SIM for CAT M1 and NB-IoT from 1NCE) the PyGo2 gives access to all the world’s LPWAN networks on one tiny board.

FEATURES

PyGo2 Features

Processing

Interfaces

Encryption

Networking

Security & Certifications

Memory

Sigfox Operating Frequencies

Bluetooth Networking

LoRa Specification

LTE-M Spec

Frequencies

Ports for LTE Bands Tx Rx
Low bands 5, 8, 12, 13, 18, 19, 20, 28 699 to 915 MHz 729 to 960 MHz
Mid bands 1, 2, 3, 4 1710 to 1980MHz 1805 to 2170 MHz

Dimensions

View product