£138.32 ex VAT
Exact Same SwitchBlox Functionality, -40°C to 85°C operating range
SwitchBlox Industrial is an upgrade to our SwitchBlox board that provides the same functionality with a wider qualified temperature range and a smaller form factor.
SwitchBlox Industrial can be used as a drop in replacement for SwitchBlox for applications that run at wider temperatures. In many cases it is also a smaller alternative to SwitchBlox Rugged (when the upper 105°C limit is not required).
It was developed by SwitchBlox Industrial for two main reasons. Firstly they wanted to upgrade the initial SwitchBlox design to improve upon size, performance and temperature range. They also wanted to help mitigate some of the stock issues on their rugged boards by providing a "middle-ground" alternative to between the standard and rugged series.
Same five 10/100Mbps, smaller size
SwitchBlox Industrial provides the same five 10/100Mbps ethernet ports as SwitchBlox, however it achieves this in a 38mm (1.49 inch) square rather than a 44.5mm (1.75 inch) square.
This was achieved by applying some of the design techniques learnt since designing SwitchBlox, namely the inter-layer differential trace placement, surface mount transformers, and optimal copper plane heat dissipation.
SwitchBlox Industrial has four M2 (2.2mm) holes for mounting into an application. This is different to the M3 holes used on the variety of their other boards.
Industrial Temperature Range
All parts on SwitchBlox Industrial are rated to operate from -40°C to 85°C, meaning the board can be used in more demanding application that SwitchBlox. This is achieved by using industrially rated silicon and passives on the board.
Passive PoE is back!
SwitchBlox Industrial now implements the Passive PoE function that was originally present on SwitchBlox. This feature means the power input applied to SwitchBlox can be routed to any or all of its powers to power downstream devices. Which ports are connected is selected by way of a DIP switch on the front of the board. Note that a single 0R resistor needs to be soldered to the board to enable this feature.
Basic Switch Management is back!
SwitchBlox Industrial also contains an STM32 so that custom firmware can be loaded to implement VLAN and Port Mirroring, a feature that was originally present on SwitchBlox.
5-60V input range with 5V, 1.5A output + power protection
Much like SwitchBlox, SwitchBlox Industrial can run from a wide voltage range from 5-60V. SwitchBlox Industrial also provides overvoltage and reverse polarity protection while also providing a regulated 5V power output with up to 1.5A current sourcing ability.
|Input Voltage Range||5-60V (reverse protected)|
|Power Consumption||300mW (Idle), 700mW (Max)|
|Output Voltage||5V, 2A|
|Ports||5 x 10/100Mb ports|
-40 to +85°C
|Storage Temperature||-40 to +85°C|
|Dimensions||45mm x 45mm x 18mm|
|PoE||15W (IEEE 802.3af)|
|HS Tariff Code||8517620000|