Through Hole Inline Pogo Pin Header - 9 Pins with 0.1" Spacing
Through Hole Inline Pogo Pin Header - 9 Pins with 0.1" Spacing is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
DESCRIPTION
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. They are used by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you can't solder headers too.
Most pogo's come as individual pins, that must be soldered into a jig to make contact. But maybe your board has 0.1" spacing already and you don't want to make a custom PCB? In that case, you can use this Pogo Pin "Header" strip, with 9 pogos in a row with 2.54mm / 0.1" spacing. There are thin stems that could be soldered into a proto or perf board. The tops are rounded and individually springy
You could snap or cut these to make smaller bits but you may lose a pogo pin in between so keep that in mind.
Comes with a single in-line 9-pin pogo header.
RESOURCES
Diagram
Through Hole Inline Pogo Pin Header - 9 Pins with 0.1" Spacing
