Tilt Switch - 15 degrees

DESCRIPTION

These operate when tilted from the horizontal position. The switch movement required to cause contact change is called the differential angle. It is very important when designing a tilt switch to allow the differential angle and understand that when in the horizontal position the switch contact may be open or closed.

• The maximum switching voltage is 60VAC/DC
• The maximum switching current is 0.25A
• 22.3mm length
• 4.7mm diameter
• The maximum switching capacity is 3VA
• Maximum contact resistance is 30 ohm
• Make angle is 10° below horizontal, break angle is 10° above horizontal and 15°differential angle
• Operating temperature range from -37° to 100°C
• Tin plated case material
• Hermetically sealed & inert gas filled sensor

RESOURCES

• Datasheet