Filters
All Products
-
Raspberry Pi NOIR Camera v2
Raspberry Pi£24.85 inc VAT
£20.71 ex VATDESCRIPTION The infra-red camera module v2 (Pi NoIR) replaced the original PiNoIR camera in April 2016. The v2 camera has a Sony IMX219 8-megapixel...
View full details£24.85 inc VAT
£20.71 ex VATSold out -
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6" (RPi 3, RPi2, B+)
Generic / OEMOriginal Price £3.84 inc VATCurrent Price £2.99 inc VAT
£2.49 ex VATDESCRIPTION This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and ge...
View full detailsOriginal Price £3.84 inc VATCurrent Price £2.99 inc VAT
£2.49 ex VATSave 22% -
Adafruit Prop-Maker FeatherWing (ID: 3988)
AdafruitOriginal Price £10.99 inc VATCurrent Price £7.16 inc VAT
£5.97 ex VATDESCRIPTION The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting in...
View full detailsOriginal Price £10.99 inc VATCurrent Price £7.16 inc VAT
£5.97 ex VATSold out -
MCP9600 I2C Thermocouple Amplifier (K, J, T, N, S, E, B and R Type T) (ID:4101)
Adafruit£16.99 inc VAT
£14.16 ex VATDESCRIPTION Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9600 does all that for...
View full details£16.99 inc VAT
£14.16 ex VATSale -
Ring:bit V2 for BBC micro:bit
ElecFreaks£5.99 inc VAT
£4.99 ex VATDESCRIPTION Ring:bit V2 is a simple module for use with the micro:bit. It breaks out 3 IO connectors, power connectors, ground connectors on the mi...
View full details£5.99 inc VAT
£4.99 ex VATSale -
Teensy Micro SD Card Adaptor
Generic / OEM£2.99 inc VAT
£2.49 ex VATDESCRIPTION This MicroSD card adaptor allows you to easily use gigabytes of flash memory with the Teensy. It can also be used on a breadboard, or w...
View full details£2.99 inc VAT
£2.49 ex VATSold out -
Lightning Detector - AS3935
SparkFun£25.49 inc VAT
£21.24 ex VATDESCRIPTION The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potentially haz...
View full details£25.49 inc VAT
£21.24 ex VATSale -
Qwiic Mux Breakout - 8 Channel (TCA9548A)
Sparkfun Electronics£11.87 inc VAT
£9.89 ex VATDESCRIPTION Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same...
View full details£11.87 inc VAT
£9.89 ex VATSale -
RV3028 Real-Time Clock (RTC) Breakout
Pimoroni£12.90 inc VAT
£10.75 ex VATDESCRIPTION An ultra-low-power ( ~100 nA), highly accurate real-time clock breakout. The RV3028 RTC breakout is perfect for adding timekeeping to ...
View full details£12.90 inc VAT
£10.75 ex VATSale -
Argon NEO Premium Raspberry Pi 4 Case
Seeed Studio£20.00 inc VAT
£16.67 ex VATDESCRIPTION Minimalist Design: The Argon NEO is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B. Slim Aluminum ...
View full details£20.00 inc VAT
£16.67 ex VATSale -
Flat Ribbon Cable for Raspberry Pi Camera and Display - 200cm
Cool Components£1.98 inc VAT
£1.65 ex VATDESCRIPTION This 200cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface).
£1.98 inc VAT
£1.65 ex VATSold out -
Zero4U - 4-Port USB Hub without Pogo Pins (v1.3) (ID:4115)
Adafruit£10.00 inc VAT
£8.33 ex VATDESCRIPTION One can never have enough socks or USB ports. Add some more USB capability to your Raspberry Pi Zero, or any other single-board compute...
View full details£10.00 inc VAT
£8.33 ex VATSale -
DS3502 I2C Digital 10K Potentiometer Breakout - STEMMA QT / Qwiic
Adafruit£7.00 inc VAT
£5.83 ex VATDESCRIPTION Talking over an I2C bus, your Arduino, CircuitPython board, or Python powered computer can talk to the DS3502 and tell it to vary its ...
View full details£7.00 inc VAT
£5.83 ex VATSale -
USB to TTL Serial Cable - Debug/Console Cable for Raspberry Pi
Cool ComponentsOriginal Price £10.50 inc VATCurrent Price £8.17 inc VAT
£6.81 ex VATDESCRIPTION This 80cm cable is the easiest way ever to connect to your Raspberry Pi or microcontroller. Inside the USB plug is a USB to Serial conv...
View full detailsOriginal Price £10.50 inc VATCurrent Price £8.17 inc VAT
£6.81 ex VATSave 22% -
Pre-loaded NOOBS 16GB MicroSD Card for Raspberry Pi 2 and 3 model B
Cool Components£12.01 inc VAT
£10.01 ex VATDESCRIPTION This is a 16GB class 10 microSD card that comes with a pre-installed with NOOBS operating system and an adapter for an SD card slot. Th...
View full details£12.01 inc VAT
£10.01 ex VATSale -
Raspberry Pi 3 GPIO Shrouded Header (2x20) (PRT-13054)
SparkFun£0.62 inc VAT
£0.52 ex VATDESCRIPTION This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 3 so you can easily connect via ribbon cable to ...
View full details£0.62 inc VAT
£0.52 ex VATSale -
DRV2605L Linear Actuator Haptic Breakout
PimoroniOriginal Price £13.99 inc VATCurrent Price £11.05 inc VAT
£9.21 ex VATDESCRIPTION This DRV2605L haptic driver breakout with a linear actuator will really get you buzzing! The powerful haptic buzz is programmable with...
View full detailsOriginal Price £13.99 inc VATCurrent Price £11.05 inc VAT
£9.21 ex VATSave 21% -
Teensy Arduino Shield Adapter (KIT-15716)
SparkFunOriginal Price £12.74 inc VATCurrent Price £9.91 inc VAT
£8.26 ex VATDESCRIPTION The Teensy is an amazing and compact development platform in a breadboard friendly form factor, but what if you could incorporate it in...
View full detailsOriginal Price £12.74 inc VATCurrent Price £9.91 inc VAT
£8.26 ex VATSave 22% -
Qwiic Joystick (COM-15168)
SparkFunOriginal Price £12.40 inc VATCurrent Price £9.65 inc VAT
£8.04 ex VATDESCRIPTION Now, you can easily add an HID/controller to your project! The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection...
View full detailsOriginal Price £12.40 inc VATCurrent Price £9.65 inc VAT
£8.04 ex VATSave 22% -
Flat Ribbon Cable for Raspberry Pi Camera and Display - 15cm
Cool Components£0.99 inc VAT
£0.83 ex VATDESCRIPTION This 15cm CSI/DSI ribbon cable is designed to connect your Raspberry Pi to the Raspberry Pi camera or display (via the CSI interface).
£0.99 inc VAT
£0.83 ex VATSold out -
Grove - Qwiic Hub - Compatible with Grove/Qwiic/STEMMA QT Modules & Controllers
Seeed Studio£3.59 inc VAT
£2.99 ex VATDESCRIPTION Different from the Grove system the Qwiic connection system is an I2C interface system createdby Sparkfun. It uses a 4pin JST SH 1.0mm ...
View full details£3.59 inc VAT
£2.99 ex VATSold out -
Qwiic Twist - RGB Rotary Encoder Breakout (DEV-15083)
SparkFun£22.42 inc VAT
£18.68 ex VATDESCRIPTION The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to the Qwiic Connect System. The Twist t...
View full details£22.42 inc VAT
£18.68 ex VATSale -
Pinbetween
PimoroniOriginal Price £7.19 inc VATCurrent Price £5.66 inc VAT
£4.72 ex VATDESCRIPTION Pinbetween gives you access to all of the micro:bit's pins at the same time as using an edge-connector add-on, and it's completely sold...
View full detailsOriginal Price £7.19 inc VATCurrent Price £5.66 inc VAT
£4.72 ex VATSave 21% -
Arduino MKR Grove Connector Carrier
ArduinoOriginal Price £19.99 inc VATCurrent Price £15.94 inc VAT
£13.28 ex VATDESCRIPTION Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNEC...
View full detailsOriginal Price £19.99 inc VATCurrent Price £15.94 inc VAT
£13.28 ex VATSave 20%