Newest Products

DESCRIPTION These ultra-fine wired LEDs were designed with model-makers and crafters in mind, but they could also come in handy if you want to add ...

DESCRIPTION These chainable NeoPixel LEDs are not only super-smart, but they are also bright with 4W total, 1W per channel, compared to 0.2W of a '...

DESCRIPTION An Infrared emitter, or IR emitter, is a source of light energy in the infrared spectrum. This little part is a light emitting diode (...

DESCRIPTION This control board is designed to make using NeoPixel and DotStar LED strips and rings as easy as possible with a Teensy microcontroll...

DESCRIPTION This shield is designed to make using NeoPixel and DotStar LED strips and rings as easy as possible with controllers that use the Ardu...

DESCRIPTION It's half USB Key, half Adafruit Trinket, the circuit board with a Trinket M0 heart and four RGB NeoPixels for a customisable glow. Ins...

DESCRIPTION This 5 meter RGB LED strip is based on WS2812 LEDs and comes packed with 30 LEDs. You can easily control the behavior of these LEDs ei...

DESCRIPTION This is a super bright LED mounted on a Aluminium board backside without a 3M stick, suggested to install on any plate for heat dissipa...

DESCRIPTION This is a super bright LED mounted on a Aluminium board backside without a 3M stick, suggested to install on any plate for heat dissipa...

DESCRIPTION This is a super bright LED mounted on a Aluminium board backside without a 3M stick ,suggested to install on any plate for heat dissipa...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board), which make the emitt...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board), which make the emitt...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board),which make the emitti...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board), which make the emitt...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board), which make the emitt...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board), which make the emitt...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board), which make the emitt...

DESCRIPTION What is a COB LED Strip Light? A COB or Chip on Board LED multiple chips on the same PCB (Printed Circuit Board),which make the emitti...

DESCRIPTION The Kitronik LED Strip with power switch is a board designed for low power lightings, such as desk lamps or accent lights. It's discre...

DESCRIPTION So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminium backed PCBs is sure to shed a lot of l...

DESCRIPTION PLEASE NOTE: This version of the strip has a 2-pin JST SM connector for supplying power and a flying data lead. This skinny 1-metre lo...

DESCRIPTION Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring...

DESCRIPTION The Cool Components LED Starter Kit contains over 100 LEDs in a range of different colours and sizes all packed in a reusable componen...

DESCRIPTION This NeoPixel compatible LED ring has 44 addressable 5mm RGB LEDs in three different rings. The LED are diffused and mounted through-h...

DESCRIPTION This Grove - LED Pack includes 4 different LEDs (red, green, blue, and white). The LED can be easily plugged on the LED Pack, and ther...

DESCRIPTION Grove - RGB LED (WS2813 Mini) is a programmable full-colour RGB LED. It uses the same WS2813 mini component as used with the Grove - R...

DESCRIPTION The Grove - RGB LED Stick (20-WS2813 Mini) is a cost-effective full-colour LED stick with 20 chainable and programmable WS2813 mini LE...

DESCRIPTION The Grove - RGB LED Stick (15-WS2813 Mini) is a cost-effective full-colour LED stick with 15 chainable and programmable WS2813 mini LE...

DESCRIPTION The Squid Combo Pack comprises a Raspberry Squid RGB LED, two Squid buttons and a Raspberry leaf to help you identify the GPIO pins. A...

DESCRIPTION Pack of two Squids – A bright RGB (Red, Green, Blue) LED with built-in resistors and female header leads that can just plug directly on...

DESCRIPTION The Raspberry Squid is an RGB LED with built-in resistors and header lead sockets that can fit directly onto GPIO pins of a Raspberry Pi.

DESCRIPTION The MonkMakes RGB LED for micro:bit provides a colourful add-on to your micro:bit. Connect it up with alligator clips and then use the...

DESCRIPTION The Grove - Ultimate RGB LED Ring is a cost-effective full-colour LED ring with 42 chainable and programmable WS2813 mini LEDs placed a...

DESCRIPTION The Grove - RGB LED Ring (24-WS2813 Mini) is a cost-effective full-colour LED ring with 24 chainable and programmable WS2813 mini LEDs ...