Sale

DESCRIPTIONThis basic set contains 10 pieces of each of 14 different lengths. The small transparent plastic case has 5 compartments. The amount of ...

DESCRIPTION This non invasive current sensor is a current clamp that can be used to detect a current of up to 60A. Simply clip it around the curr...

DESCRIPTION This is a basic 16 character by 2 line display with a Black background and a Red backlight. Utilizes the extremely common HD44780 para...

DESCRIPTION Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool....

DESCRIPTION If you're looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with an...

DESCRIPTION This analogue White LED strip is super easy to control, just plug it in and watch them glow! They come in a silicon weatherproof sleeve...

DESCRIPTION This is the SparkFun Decade Resistance Box, an involved PTH soldering kit that allows you to quickly and accurately dial in a specific...

DESCRIPTIONThis is a dual port pressure sensor from Freescale. It takes a 5 volt supply and gives an output between 0.5 and 4.5 volts. The output i...

DESCRIPTION The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino programming lang...

DESCRIPTION This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 3 so you can easily connect via ribbon cable to ...

DESCRIPTIONThis is a bog standard electronic speed controller (ESC) for brushless motors - now with a T-Plug on the power lead, which can be cut of...

DESCRIPTION These wifi dongles work great on your Raspberry Pi and Cubieboard. The wifi chip is supported in the firmware and will work out of the ...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page ...

DESCRIPTION The electromagnetic wave has been on and around the Earth (and everywhere else) since time immemorial. this work aims to make some inro...

DESCRIPTION Got your Raspberry Pi but worried that someone's going to stand on it, or zap it with 100kV of electro-static discharge? These Raspberr...

DESCRIPTION This is the SparkFun BLE Mate 2, an efficient and reliable Bluetooth 4.0 development board. The BLE Mate 2 closely resembles a breakou...

DESCRIPTIONThis Grove bundle starter kit comes with a Photon WiFi development board included for you to get up and running with your internet of th...

DESCRIPTION 500g spool of blue ABS filament for use with the entire UP! 3D printer range, specifically fits the UpBox filament compartment. Note: T...

DESCRIPTION The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. While the Fio v3 is not yet compatible with the Arduin...

DESCRIPTION This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Ar...

DESCRIPTION Triple Colour LED Matrix! This large matrix has 64 Red, 64 Green, and 64 Blue individual LEDs built into one common cathode housing. I...

DESCRIPTIONThis is the Photon IMU Shield, a versatile motion-sensing add-on board for your Photon device. Each IMU shield is equipped with an on-bo...

DESCRIPTIONCopper laminate comes in a myriad of combinations of options and from a lot of different sources! There are a LOT of choices out there. ...

DESCRIPTION Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six ...